SIMbox Base Content System Logic

Name	Description
AircraftDamage	The AircraftDamage logic component sets up the Explosion event if the aircraft is crashing
AircraftMotionAttributes	This SLC will publish attributes that were published by the AircraftMotion.slc
AutoPilot	Auto pilot for the aircraft flight model (subsonic aircraft motion)
CrashDetector	The CrashDetector logic component calculates the required vertical velocity to avoid a crash.
DMTCapabilities	The DMTCapabilities logic component handles the logic for DMT.
GenericFuelSystem	Generic Fuel System with up to 10 tanks
GenericHelicopterMotion	The GenericHelicopterMotion logic component handles the logic for a simplified helicopter motion model
GroundVehicleMotion	The GroundVehicleMotion logic component handles the motion Model for the ground vehicle.
LandingGearLogic	The LandingGearLogic logic component handles the logic for the landing gear. It is responsible for extracting/retracting the gears and also for the launching the sound.
ManeuverFormation	The ManeuverFormation logic component handles the logic for the Formation Maneuvers.
ManeuverGoToPoint	The ManeuverGoToPoint logic component handles the maneuver that enables the aircraft to fly to certain points in a specific flight speed.
ManeuverGoToPointHeading	The ManeuverGoToPointHeading logic component enables the aircraft to reach a certain point in a certain heading
ManeuverHoldCurrentPosition	The ManeuverHoldCurrentPosition logic component enables the aircraft to hold its current position.
ManeuverLanding	The ManeuverLanding logic component enables the aircraft to land on a certain point and in a specified direction
ManeuverLandingPattern	The ManeuverLandingPattern logic component handles the landing pattern maneuver.
ManeuverLevelFlight	The ManeuverLevelFlight logic component handles the flight in a defined altitude, speed and direction
ManeuverNavigate	The ManeuverNavigate logic component handles the maneuver to follow way points using Navigator.slc.
ManeuversManager	The ManeuversManager logic component manages the SLC maneuvers that were added to the Entity.
ManeuverTakeOff	The ManeuverTakeOff logic component handles the take off maneuver for the aircraft.
ManeuverTaxi	The ManeuverTaxi logic component handles the maneuver for performing ground taxiing of the aircraft
MechanicalSteering	The MechanicalSteering logic component defines the relation between the pilot command, and the steering surfaces response
Navigator	The Navigator logic component handles how the aircraft moves through the waypoints. Forward, backward and status of way points.
PathMotion	The PathMotion logic component handles how the entity moves along a path.
PistonPropEngine	The PistonPropEngine logic component
Radio	The Radio logic component is responsible for listening to events, and distributing to the appropriate member, according to the event's frequency
ShipBehavior	The ShipBehavior logic component handles the behavior of a ship
SMG_ADF_Data	The SMG_ADF_Data logic component is responsible for holding the ADF data.
SMG_AircraftExternalLightsLogic	The SMG_AircraftExternalLightsLogic logic component handles the logic of the external lights of the aircraft.
SMG_AircraftPlatform	The SMG_AircraftPlatform logic component handles the aircraft platfrom module.
SMG_AirportData	The SMG_AirportData logic component handles the data for the airport and runways.
SMG_AnimationTest	The SMG_AnimationTest logic component tests basic animations.
SMG_Areas	The SMG_Areas logic component is responsible for managing all loading, inserting and changing areas and dynamic circles
SMG_AttitudeIndicatorLogic	The SMG_AttitudeIndicatorLogic logic component handles the logic for a gyro attitude indicator.
SMG_BDHI	The SMG_BDHI logic component handles the logic for the Bearing-Distance-Heading Indicator system.
SMG_CableControl	moves the cable first link
SMG_Cessna172_Logic	The Cessna172_Logic logic component manages the Cessna logic for the support of the instruments.
SMG_CollidableStaticObject	The CollidableStaticObject logic component handles the physics logic for a static object that is collidable.
SMG_CollisionBox	The CollisionBox logic component is responsible for adding a collision box to the object and is notified of any collisions.
SMG_CollisionHandler	The CollisionHandler logic component is responsible for reporting any physical engine collision.
SMG_CompositorUtils	The SMG_CompositorUtils logic component handles the objects compositors.
SMG_DebriefCoffinMotion	in Debrief when an entity is dead there is a coffin around it
SMG_DesignTimeMotion	The SMG_DesignTimeMotion logic component provides a motion model interface for design time entities.
SMG_DME	The SMG_DME logic component simulates a DME (Distance Measuring Equipment) for the NavAids.
SMG_DRHuman	The SMG_DRHumanlogic component handles the dead reckoning for the human motion.
SMG_DTEntityDataAircraftFormation	The DTEntityDataAircraftFormation logic component controls the information of an old aircraft formation group. This SLC must be used in conjunction to DTEntityDataBasic SLC
SMG_DTEntityDataBasic	The SMG_DTEntityDataBasic logic component holds basic design-time entity data.
SMG_DustEffect	The SMG_DustEffect logic component displays the dust effect.
SMG_DynamicEntitiesCreator	The SMG_DynamicEntitiesCreator logic component dynamically loads entites and places them on subparts.
SMG_EntityLogicalState	The logical state of the entity
SMG_ExternalAircraftLogic	The SMG_ExternalAircraftLogic logic component handles the aircraft display logic.
SMG_ExternalDisplay	The SMG_ExternalDisplay logic component handles the external display of the object.
SMG_ExternalLogic	The SMG_ExternalLogic logic component handles basic external logic, including Beacon lights.
SMG_ExternalPathDisplay	The SMG_ExternalPathDisplay handles the external display of paths.
SMG_FormationFighterMissionLogic	The SMG_FormationFighterMissionLogic logic component handles the fighter mission logic for formations
SMG_FormationManager	The SMG_FormationManager logic component manages the formations.
SMG_FormationMember	The SMG_FormationMember logic component holds formation member data.
SMG_GeneralDisplay	The SMG_GeneralDisplaylogic component holds general display attributes like MFD size and the HUD position.
SMG_GenericBrainUtils	The GenericBrainUtils logic component handles all the generic brain utils that are common to all entities.
SMG_GlideSlope	Simulates a GLIDESLOPE
SMG_GroundAirRadar	The SMG_GroundAirRadar logic component handles the ground to air radar with rotating beam, beam frequencies and lock on targets
SMG_GroundMotionManager	The SMG_GroundMotionManager logic component manages the ground motion models. Handles switches between the high and low level models.
SMG_GroundPath	The SMG_GroundPath logic component holds path data.
SMG_GroupDisplay	The SMG_GroupDisplay logic component Creates a display component for a group. This component must be used in conjunction to EntityDisplay.
SMG_HumanAnimationLogic	Animation Logic that controls human entities.
SMG_HumanMotion2	The SMG_HumanMotion2 logic component handles the motion model for the humans.
SMG_IdentificationWayPointData	The SMG_IdentificationWayPointData logic component holds identification waypoint data.
SMG_ILS	The SMG_ILS logic component handles the Instrument Landing System (ILS) logic on the aircraft.
SMG_KMA24HACS_Logic	The SMG_KMA24HACS_Logic logic component handles the KMA-24H Audio Control System logic.
SMG_KN62A_Logic	The SMG_KN62A_Logic logic component handles the logic for the KN 62A system.
SMG_KR87TSO_Logic	The SMG_KR87TSO_Logic logic component handles the KR87 TSO ADF radio.
SMG_KT76CTSO_Transponder	The KT76CTSO_Transponder logic component handles the KT 76C TSO transponder logic.
SMG_KT79CTSOTransponder_Logic	The SMG_KT79CTSOTransponder_Logic logic component handles logic for the KT 79 CTSO Transponder.
SMG_KX155ATSO_ComRadioManager	The SMG_KX155ATSO_ComRadioManager logic component manages the KX 155A TSO communication radio.
SMG_KX155ATSO_Logic	The SMG_KX155ATSO_Logic logic component handles the KX 155A TSO communication radio.
SMG_KY196ATSO_Logic	The SMG_KY196ATSO_Logic logic component handles the KY 196A TSO communication radio.
SMG_Localizer	Simulates a LOCALIZER
SMG_MagneticCompass	The SMG_MagneticCompass logic component computes the Magnetic Variation.
SMG_Malfunction	The SMG_Malfunction logic component handles malfunctions.
SMG_ManeuverGoToPoint2	The SMG_ManeuverGoToPoint2 logic component handles the go to point aircraft maneuver.
SMG_ManeuverGoToPointHdg2	The SMG_ManeuverGoToPointHdg2 logic component handles when reaching a point in a required direction, using the new maneuvers core
SMG_ManeuverInterface	The SMG_ManeuverInterface logic component handles the interface for maneuvers.
SMG_ManeuverLevelFlight2	The SMG_ManeuverLevelFlight2 logic componenet handles the advanced level flight maneuver.
SMG_ManeuverPlayback	The SMG_ManeuverPlayback logic component handles the playback for maneuvers. It is Used to play recorded maneuvers.
SMG_MirrorGenericLogic	The SMG_MirrorGenericLogic logic component handles the logic for generic mirrors.
SMG_MotionModelsManager	The SMG_MotionModelsManager logic component manages the motion models that exist on the aircraft.
SMG_NavAidCommon	The SMG_NavAidCommon logic component handles all common Nav Aid Types.
SMG_NavAidsLogic	The SMG_NavAidsLogic logic component handles the logic for Nav-Aid instruments.
SMG_NavAidsManager	The SMG_NavAidsManager logic component manages the Navigation Aids.
SMG_NDB	The SMG_NDB logic component simulates a non directional beacon.
SMG_PathFollower	A simple vehicle model. Used for non controlled objects.
SMG_PathPlayer	The SMG_PathPlayer logic component handles the logic of the entity path.
SMG_PhysXAreaDetector	The SMG_PhysXAreaDetector logic component publishes if the object is in a physics engine loaded area.
SMG_PhysXCableSensor	Sensor below the cable hook
SMG_PhysXCollisionBox	The SMG_PhysXCollisionBox logic component is responsible for a volume that gets events of other collision with other physical objects.
SMG_PhysXCraneControl	The crane control input definitions
SMG_PhysXMovingObject	The SMG_PhysXMovingObject logic component is responsible for moving the object using PhysX engine.
SMG_PhysXMovingObjectLocator	Attaches the object to another physical object
SMG_PhysXObjectGrip	Creates a grip on the object
SMG_PhysXObjectWindBox	Apply a wind in a box around an initail object position
SMG_PhysXStaticObject	The SMG_PhysXStaticObject logic component is responsible for simulating static objects in the PhysX engine.
SMG_PhysXTowingFormationLogic	Moves the objects so they will fit the towing formation defined, and starts the connectors creation
SMG_RotaryWingMotion	The SMG_RotaryWingMotion logic component handles the motion models for rotary wings.
SMG_ScenarioBehavior	The SMG_ScenarioBehavior logic component is used much like general SLC to contain a list of properties which describes the interaction of the entity with the scenario.
SMG_SignalExternalLogic	The SMG_SignalExternalLogic logic component handles the logic for the external signal.
SMG_SoundLogic	The SMG_SoundLogic logic component is responsible for the object's sound logic.
SMG_SpaceMotion	The SMG_SpaceMotion logic component handles the simple motion model for in space movement.
SMG_SubpartMover_Logic	The SMG_SubpartMover_Logic logic component handles the logic behind moving subparts using the mouse.
SMG_TCAIManager	The SMG_TCAIManagerLogic logic component manages the states of the Tower Control.
SMG_TCLogic	The SMG_TCLogic logic component handles the logic of the Tower Control.
SMG_TrafficCommunication	The SMG_TrafficCommunication logic component handles the communication with the airport.
SMG_TrafficSignLogic	The SMG_TrafficSignLogic logic component handles the logic for vehicles following traffic signs.
SMG_TurboJetEngine	The SMG_TurboJetEngine logic component handles the logic for the Turbo Jet Engine.
SMG_UFC	The SMG_UFC logic component is responsible for managing the UFC system.
SMG_UFCExternal	The SMG_UFCExternal logic component handles the external logic for the UFC.
SMG_VOR	The SMG_VOR logic component simulates a VOR.
SMG_WindDataPublisher	The SMG_WindDataPublisher logic component handles wind data.
SMG_ZsAPLogicComponent	Airport Logic Layer
StaticMotion	The StaticMotionlogic component handles the motion model of static objects.
SubsonicMotionModel	The SubsonicMotionModel logic component handles the motion model of subsonic objects.
TurboPropEngine	The TurboPropEngine logic component handles the motion model turbo prop engines.
VirtualInstructor	The VirtualInstructor logic component handles the logic of the Virtual Instructor.

,