SMG TrafficCommunication

From SIMboxWiki
Jump to navigation Jump to search

The SMG_TrafficCommunication logic component handles the communication with the airport.

Type: Logic Object Component
File: SMG_TrafficCommunication.slc
Version: 450.1000.342.1


back to top

Icon properties.png Properties

NameDescriptionMaxValueMinValueDisplayNameUnitTypeUnitName
PROP_ANGLE_TO_AC_AT_FINAL_TO_ENABLE_TURN_TO_FINAL  From that angle to other AC's that at final, the AC can turn to final  180    Default  Default 
PROP_ANGLE_TO_START_TURN_AFTER_LEADER  Angle to start turn to down wind after the leader  360    Default  Default 
PROP_ANGLE_TO_START_TURN_AFTER_LEADER_IN_PARALLEL_LANDING  Angle to start turn to down wind after the leader in parallel landing  360    Default  Default 
PROP_APPROACH_POINT_NAME  The name of the approach point (for report only)  Approach Name  Default  Default 
PROP_ATC_IS_AUTO_MODE  Define ATC auto mode  ATC Is Auto Mode  Default  Default 
PROP_DEFAULT_GO_AROUND_ALT_AGL  Default go around altitude (agl) [ft]  10000  50  Default go around alt [Ft]  Default  Default 
PROP_DEFAULT_RUNWAY  Indicate the default runway  Default Runway  Default  Default 
PROP_DELAY_DOWN_WIND_FORMATION  Specify the delay in seconds between entities in formation down wind (not parallel)  100    Default  Default 
PROP_DELAY_FOR_FIRST_REQUEST  Delay in seconds for the first request  1000  Delay for First Request  Default  Default 
PROP_DELAY_FOR_PARALLEL_LANDING  Specify the delay between num 1 to 2, 3 to 4 in the formation for parallel landing. The delay between the two group is PROP_DELAY_DOWN_WIND_FORMATION  100    Default  Default 
PROP_DELAY_INITIAL_LEG_FORMATION  Specify the delay in seconds between entities in formation initial leg  100    Default  Default 
PROP_DELAY_LINEUP_FORMATION  Specify the delay in seconds between entities in formation lineup  1000    Default  Default 
PROP_DELAY_TAKEOFF_FORMATION  Specify the delay in seconds between entities in formation takeoff  1000    Default  Default 
PROP_DELAY_TURN_FORMATION  Specify the delay in seconds between entities in formation turn  1000    Default  Default 
PROP_DELETE_ENTITY_DELAY_AFTER_CABLE  Determine when the entity will be destoy - after engage with the cable  500    Default  Default 
PROP_DELETE_ENTITY_DELAY_AFTER_NET  Determine when the entity will be destoyed - after engage with the net  500    Default  Default 
PROP_DELETE_ENTITY_DELAY_AFTER_ROLL_OFF  Determine when the entity will be destoy - after roll off the runway  500    Default  Default 
PROP_DELETE_ENTITY_DELAY_FROM_END_OF_INCIDENT  Define the number of second that the entity will be destroyed after the incident is over  1000    Default  Default 
PROP_DELETE_ENTITY_DELAY_FROM_END_OF_STATE  Number of seconds after the final state is over, to kill the entity  1000    Default  Default 
PROP_DEPARTURE_POINT_NAME  The name of departure point that the AC need to fly after the takeoff  Departure Point  Default  Default 
PROP_DISTANCE_BETWEEN_FORMATION_MEMBERS_AT_APPROACH  Distance between formation members at approach (not include direct to initial leg)  100000  100    Default  Default 
PROP_DISTANCE_BETWEEN_HELICOPTERS_IN_FORMATION_TO_DEPATURE  Distance between helicopters in formation when flying to departure  10000  10    Default  Default 
PROP_DISTANCE_FOR_GO_AROUND  Distance for go around in case of no landing approval  1000    Default  Default 
PROP_DISTANCE_FOR_LANDING_REQUEST  Distance for landing request  10000  Distance for Landing Request  Default  Default 
PROP_DISTANCE_FOR_SECOND_GREEN_REPORT  Distance before the landing for second green report  10000    Default  Default 
PROP_DISTANCE_FROM_OPPOSITE_ZEBRA_TO_REPORT_CROSS  Distance from opposite zebra to report cross (at cross mode)  100000    Default  Default 
PROP_DISTANCE_FROM_WAYPOINT_TO_START_REQUEST  Distance from WP to start request to turn  100000    Default  Default 
PROP_DISTANCE_TO_START_TURN_AFTER_LEADER  Distance to start turn to down wind after the leader  1000    Default  Default 
PROP_DISTANCE_TO_START_TURN_AFTER_LEADER_IN_PARALLEL_LANDING  Distance to start turn to down wind after the leader in parallel landing  1000    Default  Default 
PROP_EXTEND_DOWN_WIND_MILES  Number of miles that the aircraft will extend the down wind  50    Default  Default 
PROP_FINAL_READ_BACK_ASPECT  Combination of aspect and distance[meter] to runway will determine which readback to say - Base or Final. Within this range report Final otherwise report Base  180    Default  Default 
PROP_FINAL_READ_BACK_DISTANCE  Combination of aspect and distance[meter] to runway will determine which readback to say - Base or Final. Within this range report Final otherwise report Base  10000    Default  Default 
PROP_FLYING_TYPE  Holds this object type (0-Fighter, 1-Commercial, 2-Trainer, 3-Helicopter)  100    Default  Default 
PROP_GET_INTO_CABLE_AT_LANDING  Determine if to get into cable at landing  Cable Landing  Default  Default 
PROP_GET_INTO_CABLE_AT_TAKEOFF  Determine if to get into cable at takeoff  Successful Abort Takeoff  Default  Default 
PROP_GREENS_MSG_AFTER_TURN_TO_FINAL_TO_BASE_LEG  Base leg greens msg    Default  Default 
PROP_GREENS_MSG_AFTER_TURN_TO_FINAL_TO_DIRECT_LANDING  Greens msg after direct landing    Default  Default 
PROP_HIDE_PARACHUTE_BELOW_SPEED_KNOTS  Below that speed [Knots] the parachute will disappear  1000    Default  Default 
PROP_IFR_GEARS_AGAIN_REPORT_DISTANCE_MILE  The distance from landing zebra to report geats again at IFRt mode.  1000    Default  Default 
PROP_IS_TO_ACTIVATE_ABORT_TAKE_OFF  Is to activate abort takeoff  Abort Takeoff  Default  Default 
PROP_IS_TO_ACTIVATE_LANDING_PROBLEM  Is to activate landing incident  Malfunction Landing  Default  Default 
PROP_IS_TO_EXTRACT_GEARS_AT_FIRST_DOWN_WIND  Determine if to extract the gears at the first down wind or not (TC exercise)  Extract Gears at First Down  Default  Default 
PROP_IS_TO_SIMULATE_TC_MESSAGE  Is to simulate TC message?    Default  Default 
PROP_KNOTS_DELTA_SPEED_TO_START_HOOKDOWN  Hookdown when the speed will be this number of knots above or below than the takeoff or touch down speed  100    Default  Default 
PROP_KNOTS_DELTA_SPEED_TO_START_ROLLOFF  RollOff when the speed will be this number of knots above or below than the takeoff or touch down speed  100    Default  Default 
PROP_LANDING_SUBPART  Landing subpart for helicopter landing  Landing Subpart  Default  Default 
PROP_LINE_UP_BEFORE_TAKE_OFF  Determine if the helicopter (or other AC) needs to line up before the takeoff  Line Up Before Takeoff  Default  Default 
PROP_METERS_BEFORE_MID_DW_TO_REPORT_DW  Determine the number of meters before down wind to report down wind (read back)  5000    Default  Default 
PROP_MILES_BEFORE_INITIAL_LEG_TO_REPORT  Miles before initial leg to report  100    Default  Default 
PROP_MILES_BEFORE_START_DW_TO_REPORT_AT_DIRECT_DW  Miles before start down wind to report at direct down wind  100    Default  Default 
PROP_MILES_TO_GO_AROUND_AT_DOWN_WIND  After that number of miles the aircraft go around and start initial leg from beginning after waiting to turn to final approval  50    Default  Default 
PROP_MILES_TO_GO_AROUND_AT_INITIAL_LEG  After that number of miles the aircraft go around and start initial leg from beginning after waiting to down wind approval  50    Default  Default 
PROP_NIGHT_BEGIN_HOUR  Define the the hour that the night begins  24    Default  Default 
PROP_NIGHT_END_HOUR  Define the the hour that the night ends  24    Default  Default 
PROP_NUM_OF_LANDING_PATTERN_BEFORE_LANDING  Number of landing pattern before final landing  100  Number of Landing Patterns  Default  Default 
PROP_OVERRIDE_GREENS_MESSAGE  Override greens message    Default  Default 
PROP_OVERRIDE_IFR_MESSAGE  Override IFR message    Default  Default 
PROP_OVERRIDE_LINEUP_MESSAGE  Override lineup message    Default  Default 
PROP_REPORT_MIDDLE_OF_DOWN_WIND  Is to report when the AC is in the middle of down wind    Default  Default 
PROP_ROLL_OFF_DELAY  The number of seconds to activate the roll off the runway after the message  50    Default  Default 
PROP_ROLL_OFF_THE_RUNWAY  0 - not to roll off. 1 - to the left side, 2 - to the right side.  Roll Off Runway  Default  Default 
PROP_SECONDS_BETWEEN_REQUESTS  Duration in seconds, between every request toward the TC  1000    Default  Default 
PROP_SECONDS_ON_GROUND_AT_TOUCH_AND_GO  Seconds to be on ground before takoff again at touch and go.  50    Default  Default 
PROP_SECONDS_TO_WAIT  Number of seconds to wait in case of TC wait command  1000    Default  Default 
PROP_SHOW_PARACHUTE_FROM_TOUCH_DOWN_SECONDS  The seconds beween the AC touch down and the parachute display.  100    Default  Default 
PROP_START_LANDING_POSITION  0 - Regular, 1 - InitialLeg, 2 - Down Wind, 3 - Direct Landing  10  Landing Mode  Default  Default 
PROP_START_TAXI_WITOUT_REQUEST  Start to taxi without any request (car)    Default  Default 
PROP_TAKE_OFF_FOR_LANDING_PATTERN  Is take off for landing pattern?  Takeoff for Landing Pattern  Default  Default 
PROP_TAKE_OFF_REQUEST  Override takeoff request    Default  Default 
PROP_TAXI_ONLY_NO_TAKEOFF_REQUEST  Is to taxi only witout moving to take off request (car...)    Default  Default 
PROP_TOWER_CONTROL_NAME  The name of tower control entity    Default  Default 
PROP_TRAFFIC_COMMUNICATION_INITIAL_STATE  Initial state (Parking, Flying,...)    Default  Default 

back to top

Icon attributes.png Attributes

NameDescriptionParam1Param2DisplayNameUnitTypeUnitName
ATT_ACTIVE_AIRCRAFT_STATE  Indicates what is the active state  string &      Default  Default 
ATT_ACTIVE_AIRCRAFT_STATE_CLASS  Indicates the state class of the aircraft  string &      Default  Default 
ATT_CURRENT_DEPARTURE_NAME  Departure name  string &      Default  Default 
ATT_CURRENT_DEPARTURE_WAYPOINT_NAME  Departure waypoint name  string &      Default  Default 
ATT_CURRENT_RUNWAY  Current runway  string &      Default  Default 
ATT_CURRENT_TAXI_NAME  Current taxi  string &      Default  Default 
ATT_CURRENT_TAXI_POINT_NAME  Current taxi point name  string &      Default  Default 
ATT_DEFAULT_DOWN_WIND_ALTITUDE_MSL  Holds the default down wind altitude msl.  float &      Length  Feet 
ATT_DEFAULT_JOIN_ALTITUDE_MSL  Holds the default join altitude msl  float &      Length  Feet 
ATT_DIRECT_LANDING_LEG  Holds the direct landing leg.  string &      Default  Default 
ATT_FINAL_RUNWAY  Holds final runway  string &      Default  Default 
ATT_GET_INTO_CABLE_AT_LANDING  Is to get into cable?  bool &      Default  Default 
ATT_GO_AROUND_LEG  Holds go around leg.  string &      Default  Default 
ATT_IS_LANDING_MANEUVER_ACTIVE  Tells if the landing maneuver is active.  bool &      Default  Default 
ATT_IS_STARTED_TO_TURN_TO_DOWN_WIND_FROM_JOIN  Is started to turn to down wind from formation?  bool &      Default  Default 
ATT_IS_TO_ACTIVATE_LANDING_PROBLEM  Is to activate landing problem?  bool &      Default  Default 
ATT_IS_TO_CHECK_COLLISION_ISIDE_FORMATION  Is to check colission inside the formation?  bool &      Default  Default 
ATT_IS_TO_EXTRACT_GEARS_AT_DOWN_WIND  Determine if to extract the gears at the next down wind or not (TC exercise)  bool &      Default  Default 
ATT_LANDING_ZEBRA  Landing zebra  LinearVec &      Default  Default 
ATT_NUM_OF_LANDING_PATTERN_BEFORE_LANDING  Number of landing pattern before final landing  int &      Default  Default 
ATT_OPPOSITE_LANDING_ZEBRA  Opposite landing zebra  LinearVec &      Default  Default 
ATT_READ_BACK_MSG  Holds the current read back message.  string &      Default  Default 
ATT_TURN_TO_DOWN_WIND_POINT  Turn to down wind point  LinearVec &      Default  Default 

back to top

Icon actions.png Actions

NameDescriptionParam1Param2DisplayNameUnitTypeUnitName
ACTION_CHANGE_FORMATION_ALTITUDE  Change formation altitude  const float      Default  Default 
ACTION_FORMATION_EXTEND_INITIAL_LEG  Formation command - extend initial leg        Default  Default 
ACTION_FORMATION_SEND_CLEARED_RUNWAY  Send cleared runway in the name of the formation  const string &      Default  Default 
ACTION_FORMATION_TAKEOFF  Formation takeoff command - from the leader to the formation  const string &      Default  Default 
ACTION_FORMATION_TAXI_PAUSE  Notify the formation members to pause their taxi        Default  Default 
ACTION_FORMATION_TAXI_RESUME  Notify the formation to resume their taxi        Default  Default 
ACTION_INITIATE_LANDING_STATE  Leader has reached to landing waypoint - so all the formation members need to initiate their landing state.        Default  Default 
ACTION_LEADER_REACHED_PATTERN_LEG  Leader has reached pattern leg  const int      Default  Default 
ACTION_LEADER_STARTED_TO_LINEUP  Leader is started to lineup  const string &      Default  Default 
INPUT_SMG_SEND_USER_TARFFIC_MESSAGE  Send usr traffic message   const int  const int    Default  Default 

back to top

Icon attributes.png Required Attributes

Name
ATT_AGL_ALT 
ATT_AIRPORT_X 
ATT_AIRPORT_XML 
ATT_AIRPORT_Y 
ATT_ARE_EXTERNAL_LIGHTS_ON 
ATT_ARE_LANDING_GEAR_RETRACTABLE 
ATT_ARE_LANDING_GEARS_DOWN 
ATT_ARE_LANDING_GEARS_OPEN 
ATT_CABLE_TO_SUBPART 
ATT_CURRENT_WAYPOINT 
ATT_CURRENT_WAYPOINT_ALT 
ATT_CURRENT_WAYPOINT_ID 
ATT_CURRENT_WAYPOINT_STAGE_NAME 
ATT_DEFAULT_LANDING_RUNWAY 
ATT_DIRECT_LANDING_REPORT_AREA_ASPECT 
ATT_DIRECT_LANDING_REPORT_AREA_DISTANCE 
ATT_DTDATA_IS_DESIGN_TIME_ENTITY 
ATT_FORMATION_GET_MEMBER_ID_BY_INDEX 
ATT_FORMATION_LEADER_ID 
ATT_FORMATION_LOCATION 
ATT_FORMATION_NAME 
ATT_FORMATION_NUM_MEMBERS 
ATT_IS_AIRPORT 
ATT_IS_LEFT_LANDING_PATTERN 
ATT_IS_MESSAGE_PLAYING 
ATT_IS_OBJECT_INITIAIZED_ON_SUBPART 
ATT_IS_ON_GROUND 
ATT_KX155ATSO_COMM_ACTIVE_FREQUENCY 
ATT_MANEUVER_GOTO_POINT_GROUND_DIST_TO_POINT 
ATT_MANEUVER_GOTO_POINT_HDG_DESTINATION_POINT 
ATT_MANEUVER_GOTO_POINT_HDG_IS_REACHED_POINT 
ATT_MANEUVER_GOTO_POINT_IS_REACHED_POINT 
ATT_MANEUVER_LANDING_ASPECT_TO_LANDING_ZEBRA 
ATT_MANEUVER_LANDING_DISTANCE_TO_LANDING_ZEBRA 
ATT_MANEUVER_LANDING_HAS_AC_LANDED 
ATT_MANEUVER_LANDING_LANDING_SPEED 
ATT_MANEUVER_LANDING_PATTERN_ASPECT_TO_LANDING_ZEBRA 
ATT_MANEUVER_LANDING_PATTERN_CURRENT_PHASE_NAME 
ATT_MANEUVER_LANDING_PATTERN_DFLT_DOWNWIND_ALT 
ATT_MANEUVER_LANDING_PATTERN_DFLT_JOIN_ALT 
ATT_MANEUVER_LEVEL_FLIGHT_IS_AT_REQUIRED_ALTITUDE 
ATT_MANEUVER_TAKEOFF_TAKEOFF_SPEED 
ATT_MANEUVERS_HAS_ENGAGED_CABLE 
ATT_MANUEVER_ACTIVE_MANUEVER_NAME 
ATT_MANUEVER_ACTIVE_MANUEVER_STACK 
ATT_NET_STATE 
ATT_NUMBER_OF_RUNWAYS 
ATT_NUMBER_OF_WAYPOINTS 
ATT_RUNWAY_HEADING 
ATT_RUNWAY_NAME 
ATT_RUNWAY_NAME_LANDING_PATTERN 
ATT_RUNWAY_TO_CABLE 
ATT_RUNWAY_TO_NET 
ATT_TC_CURRENT_RUNWAY_LANDING_HEADING 
ATT_TC_IS_TAXI_MANEUVER_ENDED 
ATT_TRUE_HEADING 

back to top

Icon actions.png Required Actions

Name
ACTION_HOOK_HANDLE_DOWN 
ACTION_MANEUVER_FORMATION_SET_DISTANCE 
ACTION_MANEUVER_FORMATION_SET_LINE 
ACTION_MANEUVER_HOLD_CURR_POSITION_SET_IS_LEFT_CIRCLE 
ACTION_MANEUVER_LANDING_LOST_BRAKES 
ACTION_MANEUVER_LANDING_PATTERN_DIRECT_JOIN_TO_DOWNWIND 
ACTION_MANEUVER_LANDING_PATTERN_GO_AROUND 
ACTION_MANEUVER_LANDING_PATTERN_HOLD_IN_DOWNWIND 
ACTION_MANEUVER_LANDING_PATTERN_SET_DOWNWIND_ALT 
ACTION_MANEUVER_LANDING_PATTERN_SET_IS_TO_EXTRACT_GEARS 
ACTION_MANEUVER_LANDING_PATTERN_SET_JOIN_ALT 
ACTION_MANEUVER_LANDING_PATTERN_SET_WAIT_FOR_APPROVAL 
ACTION_MANEUVER_LANDING_PATTERN_STOP_DO_HOLDING 
ACTION_MANEUVER_LANDING_PATTERN_TURN_TO_DOWNWIND 
ACTION_MANEUVER_LANDING_PATTERN_TURN_TO_FINAL 
ACTION_MANEUVER_LANDING_SET_IS_TO_EXTRACT_GEARS 
ACTION_MANEUVER_LEVEL_FLIGHT_SET_ALTITUDE 
ACTION_MANEUVER_LEVEL_FLIGHT_SET_HDG 
ACTION_MANEUVER_LEVEL_FLIGHT_SET_SPEED 
ACTION_MANEUVER_TAKEOFF_CANCEL_TAKEOFF 
ACTION_MANEUVER_TAKEOFF_IS_TO_RETRACT_GEARS 
ACTION_MANEUVER_TAKEOFF_SET_LEVEL_ALT 
ACTION_MANEUVER_TAXI_PAUSE 
ACTION_MANEUVER_TAXI_RESUME_TAXI 
ACTION_MANEUVERS_IS_TO_ENGAGE_NEXT_CABLE 
ACTION_MANEUVERS_REGROUP_FORMATION 
ACTION_MANEUVERS_ROLL_OFF_THE_RUNWAY 
ACTION_MANEUVERS_SET_END_OF_RUNWAY_NET_POSITION 
ACTION_MANEUVERS_SET_END_OF_RUNWAY_NET_STATUS 
ACTION_MANEUVERS_SET_NEXT_CABLE_POSITION 
ACTION_MANEUVERS_SET_TAKEOFF_SPEED 
ACTION_SET_ACTIVE_MANUEVER_NAME 
ACTION_SET_CABLE_STATE 
ACTION_SET_CURRENT_WAYPOINT_NUMBER 
ACTION_SET_LANDING_LIGHT 
ACTION_SET_VMU_TO_WORK_ON_CONTROLLED_ENTITY_ONLY 
ACTION_SHOW_PARACHUTE 
ACTION_UPDATE_LOCATION 

back to top,