ManeuverGoToPointHeading

From SIMboxWiki
Jump to navigation Jump to search

The ManeuverGoToPointHeading logic component enables the aircraft to reach a certain point with a specific heading

Type: Logic Object Component
File: ManeuverGoToPointHeading.slc
Version: 450.1000.355.1


back to top

Icon properties.png Properties

NameDescriptionMaxValueMinValueDisplayNameUnitTypeUnitName
PROP_GOTO_POINT_HDG_MANEUVER_IS_TO_LEVEL_AFTER_REACHED_POINT  Is to keep level flight after reaching point. The other option is to fly in circle around the point.     Default  Default 
PROP_MANEUVER_GOTO_POINT_HDG_MANEUVER_NAME  The maneuver name that is expected in the ACTION_DO_MANEUVER    Default  Default 
PROP_MANEUVER_GOTO_POINT_HDG_REACHED_RADIUS  The radius that the point is considered to be reached  100000    Default  Default 

back to top

Icon attributes.png Attributes

NameDescriptionParam1Param2DisplayNameUnitTypeUnitName
ATT_MANEUVER_GOTO_POINT_HDG_CIRCLE_CENTER  The circle center point  LinearVec &      Default  Default 
ATT_MANEUVER_GOTO_POINT_HDG_CIRCLE_RADIUS  The circle radius [m]  float &      Length  Meter 
ATT_MANEUVER_GOTO_POINT_HDG_DESTINATION_POINT  The destination point to reach  LinearVec &      Default  Default 
ATT_MANEUVER_GOTO_POINT_HDG_ESTIMATED_TIME_TO_GO  Time to reach the point  float &      Time  Seconds 
ATT_MANEUVER_GOTO_POINT_HDG_IS_2D_MODE  Is to check if reached the point in 2D mode   bool &      Default  Default 
ATT_MANEUVER_GOTO_POINT_HDG_IS_REACHED_POINT  True if the reached destination point is within the radius set  bool &      Default  Default 
ATT_MANEUVER_GOTO_POINT_HDG_IS_TO_CHANGE_ALT_BEFORE_POINT  Is to change altitude before reaching the point?  bool &      Default  Default 
ATT_MANEUVER_GOTO_POINT_HDG_RADIAL_ERROR  The in / out of the circle error [m]  float &      Length  Meter 
ATT_MANEUVER_GOTO_POINT_HDG_RADIAL_VELOCITY  The radial velocity [m/sec]  float &      Speed  Meter Per Second 
ATT_MANEUVER_GOTO_POINT_HDG_REQUIRED_REACH_HDG  The heading to reach the point   float &      Angle  Degree 

back to top

Icon actions.png Actions

NameDescriptionParam1Param2DisplayNameUnitTypeUnitName
ACTION_MANEUVER_GOTO_POINT_HDG_SET_2D_MODE  Sets the reach check to 2D or 3D  const bool      Default  Default 
ACTION_MANEUVER_GOTO_POINT_HDG_SET_DEST_POINT  Set the destination point  const LinearVec &      Default  Default 
ACTION_MANEUVER_GOTO_POINT_HDG_SET_HDG  Set the heading to reach the point [Deg]  const float      Default  Default 
ACTION_MANEUVER_GOTO_POINT_HDG_SET_IS_TO_CHANGE_ALT_BEFORE_POINT  Is to change altitude before reaching the point (true) or to judge in altitude to the point (false)  const bool      Default  Default 
ACTION_MANEUVER_GOTO_POINT_HDG_SET_IS_TO_LEVEL_WHEN_REACHED_POINT  Sets the boolean weather to perfrom level flight after reached point  const bool      Default  Default 
ACTION_MANEUVER_GOTO_POINT_HDG_SET_ONLY_CONVERGING_TURNS  Sets that only converging turns are allowed  const bool      Default  Default 
ACTION_MANEUVER_GOTO_POINT_HDG_SET_REACH_RADIUS  Set the distance that the point is considered reached   const float      Default  Default 
ACTION_MANEUVER_GOTO_POINT_HDG_SET_SPEED  Set the flight speed to the point  const float      Default  Default 

back to top

Icon attributes.png Required Attributes

Name
ATT_3D_OBJECT_HANDLE 
ATT_AC_FLAPS_ANGLE_DEG 
ATT_AFTERBURNER_STATUS 
ATT_AGL_ALT 
ATT_ALTIMETER_ALT 
ATT_ALTIMETER_ALT_FEET 
ATT_ARE_LANDING_GEARS_DOWN 
ATT_ARE_LANDING_GEARS_OPEN 
ATT_BODY_AOA 
ATT_BODY_VELOCITY 
ATT_CRASH_DETECTOR_REQUIRED_VVI 
ATT_FLAPS_TRANSITION_TIME 
ATT_FRONT_WHEELS_STEER_ANGLE 
ATT_GROUND_VEL_IN_BODY 
ATT_HEADING_DOT 
ATT_HEIGHT_ABOVE_GROUND 
ATT_HEIGHT_FEET 
ATT_INDICATED_AIRSPEED 
ATT_INDICATED_AIRSPEED_KNOTS 
ATT_IS_IN_MOTION 
ATT_IS_MOTION_MODEL_ENABLED 
ATT_IS_ON_GROUND 
ATT_LOAD_FACTOR 
ATT_MACH 
ATT_MANEUVER_GOTO_POINT_IS_REACHED_POINT 
ATT_MANEUVERS_DFLT_TURN_RADIUS 
ATT_MANEUVERS_HEIGHT_CORRECTION 
ATT_MANEUVERS_IS_TO_START_FROM_SCENARIO_BUILDER 
ATT_MANEUVERS_REQUIRED_LOAD_FACTOR 
ATT_MANEUVERS_SPEED_ORIENTATION 
ATT_MANEUVERS_STACK_POINTER 
ATT_MANUEVER_ACTIVE_MANUEVER_STACK 
ATT_REQUIRED_FLAPS_ANGLE 
ATT_SUBPART_ANG_FLAPS 
ATT_SUBPART_FRONTGEARZ_ABOVE_GROUND 
ATT_SUBPART_GROUND_STEER_ANG 
ATT_SUBPART_LMAINGEARZ_ABOVE_GROUND 
ATT_SUBPART_RMAINGEARZ_ABOVE_GROUND 
ATT_TRUE_AIRSPEED 
ATT_TRUE_AIRSPEED_KNOTS 
ATT_TRUE_HEADING 
ATT_TURN_RATE 
ATT_VERTICAL_VELOCITY 

back to top

Icon actions.png Required Actions

Name
ACTION_CLEAR_ALL_USED_MANEUVERS 
ACTION_CLEAR_USED_MANEUVER 
ACTION_CRASH_DETECTOR_SET_ACTIVE 
ACTION_DO_MANEUVER 
ACTION_EXTRACT_GEARS 
ACTION_MANEUVER_GOTO_POINT_SET_IS_TO_LEVEL_WHEN_REACHED_POINT 
ACTION_MANEUVER_GOTO_POINT_SET_POINT 
ACTION_MANEUVER_GOTO_POINT_SET_REACH_RADIUS 
ACTION_MANEUVER_GOTO_POINT_SET_SPEED 
ACTION_MANEUVER_LEVEL_FLIGHT_SET_ALTITUDE 
ACTION_MANEUVER_LEVEL_FLIGHT_SET_HDG 
ACTION_MANEUVER_LEVEL_FLIGHT_SET_SPEED 
ACTION_MANEUVERS_CLEAR_ALL_MANEUVERS 
ACTION_SET_ACTIVE_MANUEVER_NAME 
ACTION_SET_DAMAGE 
ACTION_SET_USED_MANEUVER_NAME 

back to top